Roadside Shelter
The Roadside range sets out to provide a series of shelters with a general rounded appearance.
This is achieved by the use of tubular steel and aluminum sections which is further enhanced by means of aluminum extrusions having a semi-circular or elliptical profile.
Many of our customers feel that the Roadside shelter provides the ideal solution to their requirements at an affordable price with the required versatility for all those differing locations.
Standards of specification are matched to performance requirements.
Key benefits
- The system uses a combination of steel and aluminum for strength and flexibility;
- vertical tubular posts support a roof which can be either low barrel vaulted or flat;
- the low vaulted roofs are provided with UV stabilized polycarbonate sheeting – the UV increasing the life expectancy of the sheet itself;
- flat roofs are constructed from a 40mm thick heavy duty sandwich panel faced to both top and underside with a coloured plastic coated galvanized steel sheeting;
- the roof of both styles provides rainwater management. Behind the semi-circular aluminum fascia, a concealed gutter system is provided to all four elevations. Rainwater is then taken down and discharged at ground level through selected major columns;
- side glazing can be 6mm toughened glass or UV stabilized polycarbonate;
- glazing is restrained on all sides, across the outer face of the vertical posts and can be either full length or divided by a mid-rail creating the possibility of providing a combination of glazing materials and also the introduction of a solid kick plate.
Standard Modules
The Roadside can be constructed to any length in modules of 1m. Both roof profiles are available in widths of 1m and 1.5m. Cantilever shelters are available up to 1.5m.
Options and Accessories
Accessories include
- Lighting
- Corporate I.D.
- Real time information display
- Seating
- Signage
- Notice boards
- Timetable case
- Solar panels
- Wind turbine
Click here to download our shelters brochure.
A full design to build service is available for non-standard and special projects. Further information is available from our customer services team please ring 01536 401331 to discuss your requirements, email or click on a colour below to enquire further:
| RAL 9016* |  |
RAL 7037 |  |
08B29* |  |
| RAL 3020 |  |
RAL 9005 |  |
RAL 10C31 |  |
| RAL 1021 |  |
RAL 5011 |  |
RAL 08B17 |  |
| RAL 6005 |  |
RAL 5021 |  |
Colours shown are not 100% accurate due to individual monitor settings. Finished swatches are available upon request from customer services. *PPA spray only (not available for thermal plastic coating).